Power Conditioners

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

SEM-600A1 is a 600 Amp, split-core, clip-on current transformer. For use with the SmartEnergy Monitor

Savant Smart Energy Sensor 

Secondary Output: 0.333 VAC at rated current.

Accuracy: ±1% from 10% to 130% of rated current.

Phase Angle: less than 2 degrees at 50% of rated current.

Lead Wire: 8 Foot (2.4m) leads, AWM 1015, 0.34mm2 (22AWG), 600V, WHITE/BLACK

The single NC/NO Control Relay companion module is designed to control one Square D™ Powerlink™ Remote controlled circuit breaker. This relay module is an essential building-block within the Savant critical load management architecture. It can dynamically

Savant Single NC/NO Control Relay Companion Module 

Control capability for Powerlink Remote controlled circuit breaker

Communicates wirelessly over Bluetooth Low Energy.

Color Display for easy identification and load status.

The single NC/NO Control Relay companion module is designed to control one Square D™ Powerlink™ Remote controlled circuit breaker. This relay module is an essential building-block within the Savant critical load management architecture. It can dynamically switch critical and non-critical loads on / off based upon previously set parameters.

The Savant Energy Monitor is an Ethernet-based power metering control unit designed to log a home’s electricity usage and production. By attaching to the incoming electrical service and branch circuits, it can measure and track energy consumption in real 

Savant Power System Monitor 

Monitor energy usage and production in real-time

Gather and store data from a variety of devices and subsystems

Flexible and scalable—base configuration supports 15 branch circuits and 3 Voltage Transformers

The Savant Energy Monitor is an Ethernet-based power metering control unit designed to log a home’s electricity usage and production. By attaching to the incoming electrical service and branch circuits, it can measure and track energy consumption in real time.

SEM-250A1 is a 250 Amp, split-core, clip-on current transformer. For use with the SmartEnergy Monitor

SEM-400A1 is a 400 Amp, split-core, clip-on current transformer. For use with the SmartEnergy Monito

The Relay 240V 30 Amp Module is designed to control a single 240V circuit load in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy. The Relay 240V 30 Amp Module can readi

Savant Relay 240V 30 Amp Module

Control capability for loads up to 7200VA (volt-amperes)

Built-in Energy monitoring; +/- 3% accuracy / 1sec sample time

Color LCD display for easy load identification, load status and energy usage

Fits into Homeline™ compatible breaker panels

Simple to configure and deploy using Blueprint Lighting Manager

The Relay 240V 30 Amp Module is designed to control a single 240V circuit load in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy. The Relay 240V 30 Amp Module can readily switch a single 30 Amp load for large appliances, allowing for dynamic management of non-lighting loads. Designed to be installed in Homeline style breaker panels.

The Dual Relay 20 Amp Module is designed to control two 120V loads in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy page. The Dual Relay 20 Amp Module can readily swit

Savant Dual Relay 20 Amp Module

Control capability for loads up to 2400VA (volt-amperes)

The Dual Relay 20 Amp Module is designed to control two 120V loads in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy page. The Dual Relay 20 Amp Module can readily switch two 20A loads independently including lighting, plug loads or any other electrical appliance up to 20 Amps, allowing for dynamic management of both lighting and non-lighting loads. Designed to be installed in Homeline style breaker panels with power fed from two electrical breakers.

Power Conditioners

Savant Dual Relay 20 Amp Module

Savant Power System Monitor

Savant Relay 240V 30 Amp Module

Savant Single NC/NO Control Relay Companion Module

Savant Smart Energy Sensor

Savant Smart Energy Sensor

Savant Smart Energy Sensor

CONTACT US

SOLUTIONS

INFO

ASSOCIATIONS

FOLLOW US

COMMITMENT TO EXCELLENCE

JOIN OUR VIP LIST!