Power Management

Most Popular

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

All Vertex models can be used as stand alone PDU’s (Power Distribution Units) or you can plug them into other power management devices to add extra outlets with a vertical configuration. When plugged into any Panamax or Furman power management product the

Panamax® 16 Outlet Black Power Distribution 

16 outlet power strip designed specifically to be mounted to the vertical leg section of an equipment rack. This is the perfect way to extend the protection and filtration from an existing Panamax or Furman power conditioner.

Simply attach mounting clips in desired location for an easy installation. Snap the VT-EXT into clips for a sturdy and secure fit and plug into a Panamax/Furman power conditioner. The plastic spacers in clips provide ground isolation from the rack.

16 AC outlets, 8 with transformer spacing.

Heavy duty detachable 10 foot, 14 AWG power cord with security retention bracket.

Ground isolation from equipment rack provided by plastic spacers in mounting clip hardware.

All Vertex models can be used as stand alone PDU’s (Power Distribution Units) or you can plug them into other power management devices to add extra outlets with a vertical configuration. When plugged into any Panamax or Furman power management product the Vertex will share all of the same AC line protection and AC line filtering.   

 In the PQ-505, Ultra-Linear Noise-Dissipation is achieved with the addition of Common-Mode filtering (30kHz–100MHz) to address symmetrical noise, which is typically picked up by the AC Line, Neutral, and Ground leads.

AudioQuest® PowerQuest® Series Power Conditioner

All three of our new rack-mountable PowerQuest models — the PQ-303, PQ-505, and PQ-707 — take AudioQuest's comprehensive approach to AC power conditioning, addressing noise linearly to provide class-leading, wide-bandwidth noise reduction (better than -22dB).

The PQ-303’s Linear Noise-Dissipation comprises Differential-Mode filtering (30kHz–1GHz), which addresses asymmetrical noise already present on the utility line or backwashed via electronic appliances and components. In the PQ-505, Ultra-Linear Noise-Dissipation is achieved with the addition of Common-Mode filtering (30kHz–100MHz) to address symmetrical noise, which is typically picked up by the AC Line, Neutral, and Ground leads. In the PQ-707, Ultra-Linear Noise Dissipation is taken even further with a wider-bandwidth (8kHz to 1GHz) Differential-Mode filter.

In addition, the PQ-707 includes Transient Power Correction (TPC).

TPC provides a current reservoir of up to 45 amps peak on-demand power for any amplifier (up to 25mS), supplying the low-impedance current the amp needs to produce thrilling dynamic contrasts, bass extension, and control.

All models feature Non-Sacrificial Surge Protection and Extreme-Voltage Automatic Shutdown at 140VAC.

If more than 140VAC is present on the incoming AC line for more than a quarter of a second, the circuit will instantly open a high-current relay that will disengage the AC power from all the PowerQuest AC outlets, activating the red front-panel LED “Overvoltage Protection” warning indicator. Once the event has passed, or the building wiring fault has been corrected, the circuit will automatically re-engage.

Take comfort in knowing that valuable gear is well protected.

All North American models provide 12 total AC outlets: 4 High-Current outlets for variable-current amplification components (power amps, powered speakers, A/V receivers, subwoofers, etc.) and 8 Linear-Filtered outlets for constant-current source components (TVs, media-streaming devices, disc players, turntables, preamplifiers, cable boxes, etc.).

Each AC power bank is isolated and optimized for the connected device, enhancing the PowerQuest's ability to efficiently control the complex interactions of:

Radio-frequency noise and other induced noises present in the AC power supplied from the utility

The noise that will be present on and in every AC cord

The noise that is produced within your system’s components and that “backwashes” into the PowerQuest’s output circuits.

Finally, all models come with optional 2RU rack ears and a detachable 2m PowerQuest power cable with a flat-to-wall plug.

The inclusion of a Direction-Controlled AC power cable is crucial to maximizing RF-Noise dissipation and means each PowerQuest unit is ready to go from the box to the rack in just minutes.

2RU rack mount “ears” included in the box.

A direction-controlled cable is crucial to maximizing RF-Noise dissipation — Included with every PQ model.

Better than the wall! Transient Power Correction and 45 amp on-demand current reservoir (shown) enable AQ Niagara level dynamics and jump-factor, like “the artist intended.”

The PQ-303’s Linear Noise-Dissipation comprises Differential-Mode filtering (30kHz–1GHz), which addresses asymmetrical noise already present on the utility line or backwashed via electronic appliances and components. 

In the PQ-707, Ultra-Linear Noise Dissipation is taken even further with a wider-bandwidth (8kHz to 1GHz) Differential-Mode filter. In addition, the PQ-707 includes Transient Power Correction (TPC).

Originally designed to partner our world-class CD555 CD player, the 555 PS can also be used with our ND 555, NDS,  NDX and NDX 2 network players, our HDX hard disk player/ server and our DAC digital to analogue converter as well as the CDX2 CD player.

NAIM® NAPS 555 DR Power Conditioner

Not everyone sees hi-fi as we do. For us, a smooth, stable, low-noise power supply isn’t just desirable: it’s fundamental to proper hi-fi performance. Nowhere is that belief more clearly exemplified than in our reference 555 PS DR, the best power supply in our portfolio.

Supplied with Power-Line mains cable as standard

Discrete Regulator (DR) configuration delivering Naim Audio’s best-ever standard of stable, low-noise power

NPX TT is the dedicated power supply for the NVC TT preamplifier, providing it with even cleaner power supply so as to enhance the sound and makes it compatible with many hi-fi systems.

NAIM® NPX TT Power Conditioner

The NPX TT is also an optional upgrade for the NVC TT when connected with the New Classic 200 & 300 Series, enabling the phono stage to reach its full potential.

Instant power supply improvement for NVC TT

Makes the NVC TT compatible with preamplifiers that cannot feed the NVC TT via Type 1 cable

Panamax® 4 Lines Analog Phone Protection Module with multiple input and output jacks

Panamax® 4 Lines Analog Phone Protection Module

Panamax® Digital 4-Line Protection Module with 120V line voltage and signal protection

Panamax® Digital 4-Line Protection Module

Panamax® Max-In-Wall Power-Pro-PFP with surge protection and EMI/RF filtration

Panamax® Max-In-Wall Power-Pro-PFP

Panamax® Max-In-Wall Power Signal Bay Extension System with ultra-thin profile and EMI/RFI noise filtration

Panamax® Max-In-Wall Power Signal Bay Extension System

Panamax® MAX Image Pro LT 15 Amp with noise filtration and automatic voltage monitoring

Panamax® MAX Image Pro LT 15 Amp

Panamax® MAX Image Pro LT 20 Amp with noise filtration and automatic voltage monitoring

Panamax® MAX Image Pro LT 20 Amp

AudioQuest PowerQuest 2 AC Power Conditioner for sale. Shop  your authorized AudioQuest dealer for the best power conditioner deals.

AudioQuest® PowerQuest 2 AC Power Conditioner

Directionally Optimized Concentric–Geometry AudioQuest Power Cord

Enhance your audio and video entertainment experience with PowerQuest. Our power filtration removes more noise and distortion than most common power conditioners, dramatically improving your system's performance. Unlike traditional surge protectors, non–sacrificial surge suppression prevents both high voltage and current from damaging your equipment, ensuring that your PowerQuest device won’t fail over time.

In addition, the PowerQuest PQ–2 features both a slim profile and a rugged floor–mounting stand that makes it ideal for mounting behind cabinets. Power cords plug straight down to the top–layer AC outlets, making installation trouble free. For those who prefer shelf mounting, the bottom stand can be easily removed. This allows easy access to all six power outlets. Sending clean power to your A/V system was never so simple or convenient.

140VAC: Will activate the main power circuit relay to open within less than 0.25 seconds; automatically resets once the incoming power is within a safe range.

Non–Sacrificial: Nothing to damage with repeated 6000V/3000A input surge tests, which is the maximum that can survive a building’s AC electrical panel.

Differential–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–1GHz. Filter linearized for dynamic (rising) line impedance with frequency from 0.05 Ohms (source) and 10 to 50 Ohm load, (system current dependent).

In addition to the Linear Filter, this outlet offers additional Noise–Dissipation technology to maximize TV performance.

1 x 4K/8K Video Optimized Linear Filter Outlet

AudioQuest PowerQuest 3 AC Power Conditioner for sale. Shop  your authorized AudioQuest dealer for the best power conditioner deals.

AudioQuest® PowerQuest 3 AC Power Conditioner

In addition, the PowerQuest PQ–3 features both a slim profile and a rugged floor–mounting stand that makes it ideal for mounting behind cabinets. Power cords plug straight down to the top–layer AC outlets, making installation trouble free. For those who prefer shelf mounting, the bottom stand can be easily removed, permitting access to two rows of AC outlets (eight total). Sending clean power to your A/V system was never so simple or convenient.

Differential–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–1GHz; Common–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–100MHz. Both filters linearized for dynamic (rising) line impedance with frequency from 0.05 Ohms (source) and 10 to 50 Ohm load, (system current dependent).

In addition to the Ultra–Linear Filters, these outlets offer additional Noise–Dissipation technology to maximize TV performance.

2 x 4K/8K Video Optimized Ultra–Linear Filter Outlets

The Niagara 3000 features our patented AC Ground-Noise Dissipation, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit.

AudioQuest® Niagara 3000 Power Conditioner

The Niagara 3000 features our patented AC Ground-Noise Dissipation, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 55 amps peak, the Niagara 3000 is specifically designed for today’s current-starved power amplifiers. Many AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 3000 corrects it.

Though it’s easy to tout a given technology, it’s quite another thing to create a solution that is consistent, holistic, functional, and that honors verifiable science. It’s not enough to reduce AC line noise and its associated distortions at just one octave, thus leaving vulnerable the adjacent octaves and octave partials to noise, resonant peaking, or insufficient noise reduction. Consistency is key. We should never accept superior resolution in one octave, only to suffer from masking effects a half-octave away and ringing artifacts two octaves from there. This is the principal criterion for AudioQuest’s Low-Z Power Noise-Dissipation System.

The Niagara 3000 represents over 20 years of exhaustive research and proven AC power products designed for audiophiles, broadcast engineers, and professional-audio applications. Every conceivable detail has been addressed: In the Niagara 3000, you’ll find optimized radio-frequency lead directionality, capacitor run-in forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper, assuring the tightest grip possible.

A great system is built from a solid foundation, and that foundation starts with power. With an AudioQuest Niagara 3000, you’ll experience for the first time the clarity, dimensionality, frequency extension, dynamic contrast, and grip your system has always been capable of delivering—if only the power had been right!

We welcome you to experience the Niagara 3000 and hear firsthand the remarkable results of highly optimized power management: startlingly deep silences, stunning dynamic freedom, outstanding retrieval of ambience cues, and gorgeous delineation of instruments and musicians in space. Once you’ve experienced it, it may seem so elegant, so logical, and so obvious that you find yourself wondering why it hadn’t been done before.

Transient Power Correction: 55 amps peak. Provides a current reservoir for any power amplifier (up to 25mS)

Level-X Linear Noise-Dissipation Technology: More than 21 octaves differential-mode filtering (10kHz–1GHz in excess of 24dB reduction) with linear response, optimized for varying line and load impedance

Patented Ground-Noise Dissipation (All outlets): 3 banks of direction-controlled ground-noise dissipation

Input Current Maximum Capacity: 20 amps RMS (total)

Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage—sonically non-invasive

Expand your mind and your outlets too! For those times when another outlet (or a few) would really just get you where you want to be. The 3 input US power strip is designed to open up your opportunities and not interfere with the sound of your system. Go 

AudioQuest® IEC>3US Power Strip

Expand your mind and your outlets too! For those times when another outlet (or a few) would really just get you where you want to be. The 3 input US power strip is designed to open up your opportunities and not interfere with the sound of your system. Go ahead. Enjoy!

The Niagara 5000 features our patented AC Ground Noise- Dissipation System, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 90

AudioQuest® Niagara 5000 Low-Z Power Noise-Dissipation System

Redefining The Science Of Power Conditioning

The science of AC power delivery is not a simple one; it demands focus, and the devil is in the details. In fact, the great increase in airborne and AC-line-transmitted radio signals, combined with overtaxed utility lines and the ever-increasing demands from high-definition audio/video components, has rendered our utilities’ AC power a somewhat antiquated technology.

Where Alternating Current (AC) is concerned, we’re relying on a century-old technology created for incandescent lights and electric motors—technology that was certainly never meant to power the sophisticated analog and digital circuits used in today’s premium audio/video systems. To properly accom-modate the promise of today’s ever-increasing bandwidth and dynamic range, we must achieve extraordinarily low noise across a very wide range of frequencies.

Further, today’s power amplifiers are being taxed for instantaneous peak-current demand, even when they’re driven at modest volumes. Although we have seen a substantial increase in dynamics from much of our audio software, the loudspeakers we employ to reproduce them are often no more efficient than they were two to four decades ago. This places great demands on an amplifier’s power supply, as well as the source AC power supplying it.

Our systems’ sensitive components need better alternating current—a fact that has resulted in a host of AC power conditioning, isolation transformer, regeneration amplifier, and battery back-up system topologies. Through differential sample tests and spectrum analysis, it can be proven that up to a third of a high-resolution (low-level) audio signal can be lost, masked, or highly distorted by the vast levels of noise riding along the AC power lines that feed our components. This noise couples into the signal circuitry as current noise and through AC ground, permanently distorting and/or masking the source signal.

Given that the stakes are so high, all sincere attempts to solve this problem must be applauded.

Once the audio/video signal is gone, it’s gone forever…

For AudioQuest, honoring the source is never a matter of simply using premium “audiophile-grade parts” or relying on a proprietary technology—common approaches within our community. For years, we have all been witness to the same, seemingly endless audiophile debates: valves versus transistors; analog versus digital; can cables really make a difference?; and on and on. While we, too, can brag about our many unique technologies, we realize that true audio/video optimization is never a matter of any one secret or exotic circuit. When it comes to noise filtering for AC power, many approaches can yield meaningful results. However, these approaches may also impart ringing, current compression, and non-linear distortions that can render the cure worse than the disease!

The Niagara 5000 features our patented AC Ground Noise- Dissipation System, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 90 amps peak, the Niagara 5000 is specifically designed for today’s current-starved power amplifiers. Many AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 5000 corrects it.

The Niagara 5000 represents over 20 years of exhaustive research and proven AC power products designed for audiophiles, broadcast engineers, and professional-audio applications. Every conceivable detail has been addressed: In the Niagara 5000, you’ll find optimized radio-frequency lead directionality, capacitor run-in forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper, assuring the tightest grip possible.

A great system is built from a solid foundation, and that foundation starts with power. With an AudioQuest Niagara 5000, you’ll experience for the first time the clarity, dimensionality, frequency extension, dynamic contrast, and grip your system has always been capable of delivering—if only the power had been right!

We welcome you to experience the Niagara 5000 and hear firsthand the remarkable results of highly optimized power management: startlingly deep silences, stunning dynamic freedom, outstanding retrieval of ambience cues, and gorgeous delineation of instruments and musicians in space. Once you’ve experienced it, it may seem so elegant, so logical, and so obvious that you find yourself wondering why it hadn’t been done before.

Surge Suppression: Non-sacrificial (nothing to damage with repeated 6000V/3000A input surge tests, which is the maximum that can survive through a building’s AC electrical panel).

Extreme Voltage Shutdown Voltage: 140VAC (will activate the main high-current relay to open within less than 0.25 second; automatically resets once the incoming power is within a safe range).

Common-Mode Noise Dissipation: In excess of 30dB from 20kHz to 100MHz, linearized for dynamic (rising) line impedance with frequency (source) and 10 to 50 ohm load, system current dependent.

Input Current Maximum Capacity: 20 amps RMS (total).

Ultra-Linear Noise-Dissipation System AC Power Outlet Banks: 4 Isolated groups – total (bank three through six).

Number of AC Outlets: 12 (4 High Current/Transient Power Correction; 8 Ultra-Linear Noise Dissipation System Power).

Power Consumption: Typically, less than 0.25 amps at 120VAC input, or with the power correction switched to Standby setting. (This is dependent on a reactive vector load. For more info, see “Operation and Continuous Use: Rear-Panel Power Correction Switch – Niagara 5000 current draw.”)

Dimensions: 17.5” W x 5.24” H x 17.2” D (3-RU rack-mounting ears, optional)

Niagara 5000 Common-Mode Noise Dissipation

High Current - AC Outlets (Schuko-EU, UK-13, NEMA-Edison type available)

(4 outlets – 3 for UK model – power amplifiers, powered subwoofers, powered speakers)

Source Component - AC Outlets (8 outlets – analog – digital - video)

6 isolated AC power outlet banks with 16 amp RMS average (@220-240VAC 50/60Hz) current capacity. These outlets utilize high spring-strength beryllium copper base metal with heavy silver-plated contacts. This assures far lower loss and distortion, while providing a superior means of draining radio frequency noise.

Ultra-Linear Differential / Common-Mode Filter

Non-Sacrificial Surge Suppressor Over a third of low-level audio/video resolution can be masked or lost to induced radio frequency and AC noise. The Niagara filters are optimized for real-world impedance and cover an unprecedented range of over 21 octaves.

Non-sacrificial surge protection and auto over-voltage shutdown means that your components be protected, AND the Niagara will also protects itself. Set and forget level protection.

From nimble, efficient Class-D to mammoth Class-A mono block power amplifiers, average (RMS) current draw can be modest (2 to 7 amps). However, wide dynamic range audio content can create very fast transient current demands …. as much as ten times that average. Our correction circuit bolsters and stabilizes the power supply of any power amplifier by providing a buffer and an instant current reservoir of up to 80 amps peak (20mS).

Ground Noise-Dissipation System (patent #8,988,168)

6 discrete circuits isolate, drain and absorb (through loss networks), the RF induced noise that masks audio and video signals. This is critical as the AC ground is directly connected to component circuit ground. Employed in concert with our Ultra-Linear filters and direction oriented, grain-controlled AudioQuest AC cables, this ensures the highest resolution and lowest distortion performance from your system components.

The Niagara 5000 features our patented AC Ground Noise- Dissipation System, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 90 amps peak, the Niagara 5000 is specifically designed for today’s current-starved power amplifiers.

Panamax® BlueBOLT Controllable Power Conditioner with two front-panel programmable reboot buttons and circuit breaker/power switch

Panamax® BlueBOLT Controllable Power Conditioner

Panamax® Max 8 AV Pro Power Surge Protector with premium filtration and surge protection

Panamax® Max 8 AV Pro Power Surge Protector

Panamax® Circuit Breaker Protected Power Distributor with 10 rear panel outlets and 15 Amps rated

Panamax® Circuit Breaker Protected Power Distributor

Panamax® End-to End Surge Protector Kit with noise filtration circuit and two diagnostic lights

Panamax® End-to End Surge Protector Kit

Panamax® Power360 Floor Strip with 8 AC outlets and 4 USB ports total

Panamax® Power360 Floor Strip

USB Port:

Panamax® Direct Plug-In Surge Protector with Protecto-or-Disconnect™ Circuitry and three diagnostic lights

Panamax® Direct Plug-In Surge Protector

Two AC receptacles provide surge protection. Fits most standard single gang plastic or metal boxes.

Panamax® Max-In-Wall 15A Duplex Surge Protector

CSA Certified for code compliant installations

This piece surrounds the receptacles and fits within a standard cover plates Decora cutout

*Both Outlets With Protect-Or-Disconnect Circuitry

Power Management

AudioQuest® IEC>3US Power Strip

AudioQuest® Niagara 3000 Power Conditioner

AudioQuest® Niagara 5000 Low-Z Power Noise-Dissipation System

AudioQuest® PowerQuest 2 AC Power Conditioner

AudioQuest® PowerQuest 3 AC Power Conditioner

AudioQuest® PowerQuest® Series Power Conditioner

AudioQuest® PowerQuest® Series Power Conditioner

AudioQuest® PowerQuest® Series Power Conditioner

NAIM® NAPS 555 DR Power Conditioner

NAIM® NPX TT Power Conditioner

Panamax® 4 Lines Analog Phone Protection Module

Panamax® 16 Outlet Black Power Distribution

Panamax® BlueBOLT Controllable Power Conditioner

Panamax® Circuit Breaker Protected Power Distributor

Panamax® Digital 4-Line Protection Module

Panamax® Direct Plug-In Surge Protector

Panamax® End-to End Surge Protector Kit

Panamax® Max-In-Wall 15A Duplex Surge Protector

Panamax® Max-In-Wall Power-Pro-PFP

Panamax® Max-In-Wall Power Signal Bay Extension System

Panamax® Max 8 AV Pro Power Surge Protector

Panamax® MAX Image Pro LT 15 Amp

Panamax® MAX Image Pro LT 20 Amp

Panamax® Power360 Floor Strip

CONTACT US

SOLUTIONS

INFO

ASSOCIATIONS

FOLLOW US

COMMITMENT TO EXCELLENCE

JOIN OUR VIP LIST!