Power Conditioners

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Average Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

Designed to complement our XS range, the FlatCap XS is a dual-rail, dual-output power supply that powers not just one, but two Naim Audio components if required. It’s a logical, high-value and highly effective upgrade path – just as you’d expect from Naim

NAIM XS Series Black Power Conditioner

For example, an XS Series owner could add a FlatCap XS to enhance the performance of both a CD5 XS and a NAC 152 XS, and so enjoy all the improvements to clarity, dynamics and timing you’d expect from any Naim Audio power supply upgrade.

Dual-rail power supply with four 24V power outputs

Black-anodized chassis with brushed front panel plus anti-vibration feet

The FlatCap XS transformer has two separate secondary windings to isolate each of the dual supplies from the other. It includes four Naim Audio-tested and selected low-noise regulators to achieve its exceptional performance.

Designed to complement our XS range, the FlatCap XS is a dual-rail, dual-output power supply that powers not just one, but two Naim Audio components if required. It’s a logical, high-value and highly effective upgrade path – just as you’d expect from Naim Audio.

SEM-600A1 is a 600 Amp, split-core, clip-on current transformer. For use with the SmartEnergy Monitor

Savant Smart Energy Sensor 

Secondary Output: 0.333 VAC at rated current.

Accuracy: ±1% from 10% to 130% of rated current.

Phase Angle: less than 2 degrees at 50% of rated current.

Lead Wire: 8 Foot (2.4m) leads, AWM 1015, 0.34mm2 (22AWG), 600V, WHITE/BLACK

The single NC/NO Control Relay companion module is designed to control one Square D™ Powerlink™ Remote controlled circuit breaker. This relay module is an essential building-block within the Savant critical load management architecture. It can dynamically

Savant Single NC/NO Control Relay Companion Module 

Control capability for Powerlink Remote controlled circuit breaker

Communicates wirelessly over Bluetooth Low Energy.

Color Display for easy identification and load status.

The single NC/NO Control Relay companion module is designed to control one Square D™ Powerlink™ Remote controlled circuit breaker. This relay module is an essential building-block within the Savant critical load management architecture. It can dynamically switch critical and non-critical loads on / off based upon previously set parameters.

The Savant Energy Monitor is an Ethernet-based power metering control unit designed to log a home’s electricity usage and production. By attaching to the incoming electrical service and branch circuits, it can measure and track energy consumption in real 

Savant Power System Monitor 

Monitor energy usage and production in real-time

Gather and store data from a variety of devices and subsystems

Flexible and scalable—base configuration supports 15 branch circuits and 3 Voltage Transformers

The Savant Energy Monitor is an Ethernet-based power metering control unit designed to log a home’s electricity usage and production. By attaching to the incoming electrical service and branch circuits, it can measure and track energy consumption in real time.

SEM-250A1 is a 250 Amp, split-core, clip-on current transformer. For use with the SmartEnergy Monitor

SEM-400A1 is a 400 Amp, split-core, clip-on current transformer. For use with the SmartEnergy Monito

The Relay 240V 30 Amp Module is designed to control a single 240V circuit load in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy. The Relay 240V 30 Amp Module can readi

Savant Relay 240V 30 Amp Module

Control capability for loads up to 7200VA (volt-amperes)

Built-in Energy monitoring; +/- 3% accuracy / 1sec sample time

Color LCD display for easy load identification, load status and energy usage

Fits into Homeline™ compatible breaker panels

Simple to configure and deploy using Blueprint Lighting Manager

The Relay 240V 30 Amp Module is designed to control a single 240V circuit load in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy. The Relay 240V 30 Amp Module can readily switch a single 30 Amp load for large appliances, allowing for dynamic management of non-lighting loads. Designed to be installed in Homeline style breaker panels.

The Dual Relay 20 Amp Module is designed to control two 120V loads in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy page. The Dual Relay 20 Amp Module can readily swit

Savant Dual Relay 20 Amp Module

Control capability for loads up to 2400VA (volt-amperes)

The Dual Relay 20 Amp Module is designed to control two 120V loads in a Panelized Lighting system (for use with Flexible Load Management, the latest Savant Power System Modules can be found on the Energy page. The Dual Relay 20 Amp Module can readily switch two 20A loads independently including lighting, plug loads or any other electrical appliance up to 20 Amps, allowing for dynamic management of both lighting and non-lighting loads. Designed to be installed in Homeline style breaker panels with power fed from two electrical breakers.

The SANUS Component Series CAPC01 power conditioner features adjustable, dual pull-out LED lights to easily illuminate rack equipment and 11 fast-acting 2,400-Joule protected outlets.

Sanus® Component Series Black Power Conditioner

A multi-mode LED panel indicates voltage, amps and power consumption. EMI/RFI noise filtration eliminates noise up to 30 dB, ensuring quality signals.

Package Width

Package Height

Package Depth

The SANUS ELM205 is a flat-panel HD power conditioner and surge protector that features ClickFit™ compatibility to attach directly to SANUS LT25 and LL22 wall mounts. It sits just 1.31" from the wall, making it perfect for use behind flat-panel TV wall mo

Sanus® Black Flat-Panel HD Power Conditioner and Surge Protector

2,700-Joule surge protection shields valuable electronics from damaging power surges. Dual-stage EMI/RFI filters eliminate noise from 20-50 dB (100 kHz-1 MHz) for superior quality signals.

Fits perfectly behind mounted TV and furniture

Guard your components against damaging power surges

RoHS compliant to protect consumers, health and the environment

The SANUS ELM205 is a flat-panel HD power conditioner and surge protector that features ClickFit™ compatibility to attach directly to SANUS LT25 and LL22 wall mounts. It sits just 1.31" from the wall, making it perfect for use behind flat-panel TV wall mounts and furniture.

Noise Filtration:

Compliance:

Clamping Voltage:

 In the PQ-505, Ultra-Linear Noise-Dissipation is achieved with the addition of Common-Mode filtering (30kHz–100MHz) to address symmetrical noise, which is typically picked up by the AC Line, Neutral, and Ground leads.

AudioQuest® PowerQuest® Series Power Conditioner

All three of our new rack-mountable PowerQuest models — the PQ-303, PQ-505, and PQ-707 — take AudioQuest's comprehensive approach to AC power conditioning, addressing noise linearly to provide class-leading, wide-bandwidth noise reduction (better than -22dB).

The PQ-303’s Linear Noise-Dissipation comprises Differential-Mode filtering (30kHz–1GHz), which addresses asymmetrical noise already present on the utility line or backwashed via electronic appliances and components. In the PQ-505, Ultra-Linear Noise-Dissipation is achieved with the addition of Common-Mode filtering (30kHz–100MHz) to address symmetrical noise, which is typically picked up by the AC Line, Neutral, and Ground leads. In the PQ-707, Ultra-Linear Noise Dissipation is taken even further with a wider-bandwidth (8kHz to 1GHz) Differential-Mode filter.

In addition, the PQ-707 includes Transient Power Correction (TPC).

TPC provides a current reservoir of up to 45 amps peak on-demand power for any amplifier (up to 25mS), supplying the low-impedance current the amp needs to produce thrilling dynamic contrasts, bass extension, and control.

All models feature Non-Sacrificial Surge Protection and Extreme-Voltage Automatic Shutdown at 140VAC.

If more than 140VAC is present on the incoming AC line for more than a quarter of a second, the circuit will instantly open a high-current relay that will disengage the AC power from all the PowerQuest AC outlets, activating the red front-panel LED “Overvoltage Protection” warning indicator. Once the event has passed, or the building wiring fault has been corrected, the circuit will automatically re-engage.

Take comfort in knowing that valuable gear is well protected.

All North American models provide 12 total AC outlets: 4 High-Current outlets for variable-current amplification components (power amps, powered speakers, A/V receivers, subwoofers, etc.) and 8 Linear-Filtered outlets for constant-current source components (TVs, media-streaming devices, disc players, turntables, preamplifiers, cable boxes, etc.).

Each AC power bank is isolated and optimized for the connected device, enhancing the PowerQuest's ability to efficiently control the complex interactions of:

Radio-frequency noise and other induced noises present in the AC power supplied from the utility

The noise that will be present on and in every AC cord

The noise that is produced within your system’s components and that “backwashes” into the PowerQuest’s output circuits.

Finally, all models come with optional 2RU rack ears and a detachable 2m PowerQuest power cable with a flat-to-wall plug.

The inclusion of a Direction-Controlled AC power cable is crucial to maximizing RF-Noise dissipation and means each PowerQuest unit is ready to go from the box to the rack in just minutes.

2RU rack mount “ears” included in the box.

A direction-controlled cable is crucial to maximizing RF-Noise dissipation — Included with every PQ model.

Better than the wall! Transient Power Correction and 45 amp on-demand current reservoir (shown) enable AQ Niagara level dynamics and jump-factor, like “the artist intended.”

The PQ-303’s Linear Noise-Dissipation comprises Differential-Mode filtering (30kHz–1GHz), which addresses asymmetrical noise already present on the utility line or backwashed via electronic appliances and components. 

In the PQ-707, Ultra-Linear Noise Dissipation is taken even further with a wider-bandwidth (8kHz to 1GHz) Differential-Mode filter. In addition, the PQ-707 includes Transient Power Correction (TPC).

Panamax® BlueBOLT IP Card compatible with F1500-UPS and MB1500

Panamax® BlueBOLT IP Card

Panamax® Max-In-Wall Power-Pro-PFP with surge protection and EMI/RF filtration

Panamax® Max-In-Wall Power-Pro-PFP

Panamax® Max-In-Wall Power Signal Bay Extension System with ultra-thin profile and EMI/RFI noise filtration

Panamax® Max-In-Wall Power Signal Bay Extension System

AudioQuest PowerQuest 2 AC Power Conditioner for sale. Shop  your authorized AudioQuest dealer for the best power conditioner deals.

AudioQuest PowerQuest 2 AC Power Conditioner

Directionally Optimized Concentric–Geometry AudioQuest Power Cord

Enhance your audio and video entertainment experience with PowerQuest. Our power filtration removes more noise and distortion than most common power conditioners, dramatically improving your system's performance. Unlike traditional surge protectors, non–sacrificial surge suppression prevents both high voltage and current from damaging your equipment, ensuring that your PowerQuest device won’t fail over time.

In addition, the PowerQuest PQ–2 features both a slim profile and a rugged floor–mounting stand that makes it ideal for mounting behind cabinets. Power cords plug straight down to the top–layer AC outlets, making installation trouble free. For those who prefer shelf mounting, the bottom stand can be easily removed. This allows easy access to all six power outlets. Sending clean power to your A/V system was never so simple or convenient.

140VAC: Will activate the main power circuit relay to open within less than 0.25 seconds; automatically resets once the incoming power is within a safe range.

Non–Sacrificial: Nothing to damage with repeated 6000V/3000A input surge tests, which is the maximum that can survive a building’s AC electrical panel.

Differential–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–1GHz. Filter linearized for dynamic (rising) line impedance with frequency from 0.05 Ohms (source) and 10 to 50 Ohm load, (system current dependent).

In addition to the Linear Filter, this outlet offers additional Noise–Dissipation technology to maximize TV performance.

1 x 4K/8K Video Optimized Linear Filter Outlet

AudioQuest PowerQuest 3 AC Power Conditioner for sale. Shop  your authorized AudioQuest dealer for the best power conditioner deals.

AudioQuest PowerQuest 3 AC Power Conditioner

In addition, the PowerQuest PQ–3 features both a slim profile and a rugged floor–mounting stand that makes it ideal for mounting behind cabinets. Power cords plug straight down to the top–layer AC outlets, making installation trouble free. For those who prefer shelf mounting, the bottom stand can be easily removed, permitting access to two rows of AC outlets (eight total). Sending clean power to your A/V system was never so simple or convenient.

Differential–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–1GHz; Common–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–100MHz. Both filters linearized for dynamic (rising) line impedance with frequency from 0.05 Ohms (source) and 10 to 50 Ohm load, (system current dependent).

In addition to the Ultra–Linear Filters, these outlets offer additional Noise–Dissipation technology to maximize TV performance.

2 x 4K/8K Video Optimized Ultra–Linear Filter Outlets

Vertical strip style power distribution unit (PDU) / surge protector with local area network and BlueBOLT cloud control.

Panamax® VT1512-IP Power Management

The VT1512-IP is a BlueBOLT enabled slim form factor vertical rack power conditioner and power sequencer. The VT1512-IP is a full featured power conditioner providing protection and filtration for maximum longevity and performance of connected equipment. BlueBOLT enabled, the VT1512-IP allows remote reboot of 12 individually controlled outlets, as well as the ability to monitor energy use, set alerts, program scheduled commands, network pings with conditioner reboots. For non-Cloud applications the VT1512-IP has an embedded webpage for control and programming, or you can use a LAN for secure control via an ELAN or other 3rd party control systems.

IP Monitor & Control - BlueBOLT™ enabled for IP control and monitoring

12 individually controlled outlets, 3 spaced for wall-warts & 6 turned 90°

Ground lug to attach Panamax signal-line protection modules

Sleek design ideal for vertical mounting to an equipment rack with included brackets

10 foot power cord with removable plug to customize length

$5,000,000 Connected Equipment Protection Policy when used with Panamax signal-line protection modules.

The Niagara 3000 features our patented AC Ground-Noise Dissipation, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit.

AudioQuest® Niagara 3000 Power Conditioner

The Niagara 3000 features our patented AC Ground-Noise Dissipation, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 55 amps peak, the Niagara 3000 is specifically designed for today’s current-starved power amplifiers. Many AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 3000 corrects it.

Though it’s easy to tout a given technology, it’s quite another thing to create a solution that is consistent, holistic, functional, and that honors verifiable science. It’s not enough to reduce AC line noise and its associated distortions at just one octave, thus leaving vulnerable the adjacent octaves and octave partials to noise, resonant peaking, or insufficient noise reduction. Consistency is key. We should never accept superior resolution in one octave, only to suffer from masking effects a half-octave away and ringing artifacts two octaves from there. This is the principal criterion for AudioQuest’s Low-Z Power Noise-Dissipation System.

The Niagara 3000 represents over 20 years of exhaustive research and proven AC power products designed for audiophiles, broadcast engineers, and professional-audio applications. Every conceivable detail has been addressed: In the Niagara 3000, you’ll find optimized radio-frequency lead directionality, capacitor run-in forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper, assuring the tightest grip possible.

A great system is built from a solid foundation, and that foundation starts with power. With an AudioQuest Niagara 3000, you’ll experience for the first time the clarity, dimensionality, frequency extension, dynamic contrast, and grip your system has always been capable of delivering—if only the power had been right!

We welcome you to experience the Niagara 3000 and hear firsthand the remarkable results of highly optimized power management: startlingly deep silences, stunning dynamic freedom, outstanding retrieval of ambience cues, and gorgeous delineation of instruments and musicians in space. Once you’ve experienced it, it may seem so elegant, so logical, and so obvious that you find yourself wondering why it hadn’t been done before.

Transient Power Correction: 55 amps peak. Provides a current reservoir for any power amplifier (up to 25mS)

Level-X Linear Noise-Dissipation Technology: More than 21 octaves differential-mode filtering (10kHz–1GHz in excess of 24dB reduction) with linear response, optimized for varying line and load impedance

Patented Ground-Noise Dissipation (All outlets): 3 banks of direction-controlled ground-noise dissipation

Input Current Maximum Capacity: 20 amps RMS (total)

Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage—sonically non-invasive

Panamax® Voltage Regulator/Power Conditioner with dual learning IR output controls and fully programmable

Panamax® Voltage Regulator/Power Conditioner

USB Port:

Panamax® BlueBOLT Controllable Power Conditioner with two front-panel programmable reboot buttons and circuit breaker/power switch

Power Conditioners

AudioQuest PowerQuest 2 AC Power Conditioner

AudioQuest PowerQuest 3 AC Power Conditioner

AudioQuest® Niagara 3000 Power Conditioner

AudioQuest® PowerQuest® Series Power Conditioner

AudioQuest® PowerQuest® Series Power Conditioner

AudioQuest® PowerQuest® Series Power Conditioner

NAIM XS Series Black Power Conditioner

Panamax® BlueBOLT Controllable Power Conditioner

Panamax® BlueBOLT IP Card

Panamax® Max-In-Wall Power-Pro-PFP

Panamax® Max-In-Wall Power Signal Bay Extension System

Panamax® Voltage Regulator/Power Conditioner

Panamax® VT1512-IP Power Management

Sanus® Black Flat-Panel HD Power Conditioner and Surge Protector

Sanus® Component Series Black Power Conditioner

Savant Dual Relay 20 Amp Module

Savant Power System Monitor

Savant Relay 240V 30 Amp Module

Savant Single NC/NO Control Relay Companion Module

Savant Smart Energy Sensor

Savant Smart Energy Sensor

Savant Smart Energy Sensor

CONTACT US

SOLUTIONS

INFO

ASSOCIATIONS

FOLLOW US

COMMITMENT TO EXCELLENCE

JOIN OUR VIP LIST!