Cable Accessories

Most Popular

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

AudioQuest’s Fog Lifters work so well because of how effectively they address a significant source of misinformation—Radio-Frequency Noise coupled from the floor into audio and AC cables.

AudioQuest® Black 8 Piece Fog Lifters Kit

Place an absolute minimum of solid material in direct contact with the cable

Reduce the RF noise that capacitively couples into cables through all solid materials (carpet, stone, wood, etc.)

Dimensions: 5.6” x 5.6” (footprint); 6.25” (height)

For four decades, AudioQuest has stated as clearly as possible, that pretty much all audio improvements come from reducing “damage”—either by preserving the original information or by not adding misinformation.

A carpet or wood floor, not to mention a concrete floor, might not at first seem like a source of RF Noise, but in fact RF energy is all around us and always wants to go wherever it can find a lower energy state.

Think of lightning or static electricity, especially in winter. You don’t think of yourself as an energy source, but dry heated air can make it painfully obvious that there’s an energy differential between you and the things you touch. That’s not an exact analogy, but very close.

Fog Lifters significantly reduce RF coupling, whether with the floor, or due to misdirected efforts to isolate cable with stands or clamps that themselves have too much mass and are sources of RF Noise.

A few inches or centimeters might not seem important, but as with light coming from a bulb, the energy falls off exponentially. A few inches or centimeters makes a big difference—which translates into a lower noise-floor and less compromise to, and distortion in, attached active circuits.

If you’re thinking “my cables are shielded, so there is no noise problem,” you’re partially correct—but at the high frequencies we’re bathed in thanks to cellular, Wi-Fi, etc., conventional shielding does not stop RF Noise from being capacitively coupled into signal-carrying conductors—not to mention that the shield itself is drained to a ground plane, which is in a sense as sensitive as the signal because “signal” is the difference between signal and ground.

These Direct Gold-Plated Spade connectors fit a 3/16" binding post, will fit wire up to 10 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1010/G Spade Gold Set of 4 Connectors

Fit a 3/16" binding post, will fit wire up to 10 AWG

Supplied with 2 x red & 2 x black "boots" for a seamless-looking termination

These Direct Gold-Plated Spade connectors fit a 3/16" binding post, will fit wire up to 10 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1010/G Spade Gold Pack of 40 Connectors

Supplied with 20 x red & 20 x black "boots" for a seamless-looking termination

These Direct Silver-Plated Spade connectors fit a 3/16" binding post, will fit wire up to size 10 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination

AudioQuest® 1010/S Spade Silver Set of 4 Connectors

These Direct Silver-Plated Spade connectors fit a 3/16" binding post, will fit wire up to size 10 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination

AudioQuest® 1010/S Spade Silver Pack of 40 Connectors

These Direct Gold-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 10 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1014/G Spade Gold Set of 4 Connectors

Fit a 1/4" binding post, will fit wire up to 10 AWG

These Direct Gold-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 10 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1014/G Spade Gold Pack of 40 Connectors

Fit a 1/4"  binding post, will fit wire up to 10 AWG

These Direct Silver-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 10 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1014/S Spade Silver Set of 4 Connectors

These Direct Silver-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 10 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1014/S Spade Silver Pack of 40 Connectors

These Direct Gold-Plated Spade connectors fit a 3/16" binding post, will fit wire up to 14 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1410/G Spade Gold Set of 4 Connectors

Fit a 3/16" binding post, will fit wire up to 14 AWG

These Direct Gold-Plated Spade connectors fit a 3/16" binding post, will fit wire up to 14 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1410/G Spade Gold Pack of 40 Connectors

Supplied with 20 x red & 20 black "boots" for a seamless-looking termination

These Direct Silver-Plated Spade connectors fit a 3/16" binding post, will fit wire up to 14 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1410/S Spade Silver Set of 4 Connectors

These Direct Silver-Plated Spade connectors fit a 3/16" binding post, will fit wire up to 14 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1410/S Spade Silver Pack of 40 Connectors

These Direct Gold-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 14 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1414/G Spade Gold Set of 4 Connectors

Fit a 1/4" binding post, will fit wire up to 14 AWG

These Direct Gold-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 14 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1414/G Spade Gold Pack of 40 Connectors

These Direct Silver-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 14 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® 1414/S Spade Silver Set of 4 Connectors

These Direct Silver-Plated Spade connectors fit a 1/4" binding post, will fit wire up to 14 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® 1414/S Spade Silver Pack of 40 Connectors

These Direct Gold-Plated bendable pin connectors fit almost any connection, will fit wire up to 10 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® BP10/G Set of 4 Gold Pin Connectors

Direct Gold-Plated bendable pin connectors

2 x red & 2 x black "boots" for a seamless-looking termination

These Direct Gold-Plated bendable pin connectors fit almost any connection, will fit wire up to 10 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® BP10/G Set of 40 Gold Pin Connectors

20 x red & 20 x black "boots" for a seamless-looking termination

These Direct Silver-Plated bendable pin connectors fit almost any connection, will fit wire up to 10 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® BP10/S Set of 4 Silver Pin Connectors

Direct Silver-Plated bendable pin connectors

These Direct Gold-Plated BFA/Banana connectors fit a standard banana jack, will fit wire up to 9 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® BFA/G Set of 4 BFA/Banana Gold Connectors

These Direct Gold-Plated BFA/Banana connectors fit a standard banana jack, will fit wire up to 9 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.

AudioQuest® BFA/G Pack of 40 BFA/Banana Gold Connectors

These Direct Silver-Plated BFA/Banana connectors fit a standard banana jack, will fit wire up to 9 AWG, and are supplied with 2 x red & 2 x black "boots" for a seamless-looking termination.

AudioQuest® BFA/S Set of 4 BFA/Banana Silver Connectors

Direct Silver-Plated BFA/Banana connectors

These Direct Silver-Plated BFA/Banana connectors fit a standard banana jack, will fit wire up to 9 AWG, and are supplied with 20 x red & 20 x black "boots" for a seamless-looking termination.